Theory of Freeze Drying:

Freeze-dry (brief named Freeze-dry) is a stable process of material dried which will put the material contained with water to freeze to solid first, then make among them of the water sublimate from solid to air condition, removing water to preserve materials

Products at solution stage are frozen through sublimation and desorption, then the solvent reduce to a certain extent, thereby preventing the formation of micro-organisms or chemical reaction between the solute and solvent that products can be preserved for a long time and maintained its nature.

Vacuum freeze-drying method is a liquid → solid → gaseous process. In freeze-drying process, "liquid bridge" between the solution particles has been frozen into "solid bridge". The relative position of particles has been fixed and does not exist surface tension on gas-liquid interface between the two particles. With the continuous distillation of solvent, "solid bridge" continuously decrease, but the the relative position between two particles will not longer change until the "solid bridge" completely disappear.

LTDG-250 Vacuum Freeze Dryer
	Product structure			Technical parameters	Remarks
Design Standard：CGMP
※     Public distribution
	Power（three-phase and five-wire system）			380V/50HZ
	Total Power			133.5KW
	Freeze Power			91KW
	Steam heating Power			15KW
	Vacuum Power			27.5KW
	Total cooling water Qty			≥76m3/h(T≤30℃/P=0.1-0.15Mpa)
	Cooling water of refrigerant system			60m3/h
	Cooling water by heat			15m3/h
	Cooling water of vacuum pump			0.9m3/h
	Compressed air			≥0.45 m3/min（P=0.5-0.8Mpa）
	Defrost water			≥25m3/h (T=50-60℃,P=0.1MPa)
	Steam consumption			≥700kg/ h（pressure≥0.2-0.3MPa）
	Dry chamber （L*W*H）			11000*2200*3200	(According to design standard)
	Condenser（L*W*H）			2300*5000*2800
	Unite （L*W*H）			4000*2200*2200
	Scan the QR code to read on your phone We could not find any corresponding parameters, please add them to the properties table Previous None Next None LTDG-250 Vacuum Freeze Drying Machine   Product description [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Theory of Freeze Drying: Freeze-dry (brief named Freeze-dry) is a stable process of material dried which will put the material contained with water to freeze to solid first, then make among them of the water sublimate from solid to air condition, removing water to preserve materials Products at solution stage are frozen through sublimation and desorption, then the solvent reduce to a certain extent, thereby preventing the formation of micro-organisms or chemical reaction between the solute and solvent that products can be preserved for a long time and maintained its nature. Vacuum freeze-drying method is a liquid → solid → gaseous process. In freeze-drying process, "liquid bridge" between the solution particles has been frozen into "solid bridge". The relative position of particles has been fixed and does not exist surface tension on gas-liquid interface between the two particles. With the continuous distillation of solvent, "solid bridge" continuously decrease, but the the relative position between two particles will not longer change until the "solid bridge" completely disappear.            LTDG-250 Vacuum Freeze Dryer   Product structure Technical parameters Remarks Design Standard：CGMP ※     Public distribution   Power（three-phase and five-wire system） 380V/50HZ     Total Power 133.5KW     Freeze Power 91KW     Steam heating Power 15KW     Vacuum Power 27.5KW     Total cooling water Qty ≥76m3/h(T≤30℃/P=0.1-0.15Mpa)     Cooling water of refrigerant system 60m3/h     Cooling water by heat 15m3/h     Cooling water of vacuum pump 0.9m3/h     Compressed air ≥0.45 m3/min（P=0.5-0.8Mpa）     Defrost water ≥25m3/h (T=50-60℃,P=0.1MPa)     Steam consumption ≥700kg/ h（pressure≥0.2-0.3MPa）     Dry chamber （L*W*H） 11000*2200*3200  (According to design standard)   Condenser（L*W*H） 2300*5000*2800     Unite （L*W*H） 4000*2200*2200     扫二维码用手机看 未找到相应参数组，请于后台属性模板中添加 上一个 无 下一个 无 Add:LTPM CHINA 2nd Floor,Dongxin Road and 5th Development Road ,Caizhai Industrial Zone,  Ruian City, Zhejing Province ,China Tel:86-0577-65158955    Fax: 86-0577-65158944 Business Phone : 86-0577-65158955 E-mail:info@chinaleadtop.com About Us Profile Quality Control Factory Tour   Products Solid Dosage Solution Liquid Filling Solution Injectable Solution Inner Packaging Solution More>>   News Company News Trade News Exhibition Contact Us Message Contact Us LeadTop Pharmaceutical Machinery Co., LTD 　浙ICP备16043185号-1 Powered by www.300.cn LeadTop Pharmaceutical Machinery Co., LTD　浙ICP备20003428号-1 Powered by www.300.cn