FOREWORD

Our company is a large scale company that specialized in development and manufacture of many models of thermal shrink packaging machines, and equipped with advanced production machinery. We have large scope of products models: micro- and extra-large machine, manual model and automatic model, simple model and high-exactitude model, which can meet many different requirements. Our shrink packaging machine has advantage of high heating efficiency, accurate temperature control and stable performances, which helps us win big market share in China, even overseas.

SPECIFICATION

STRUCTURE DIAGRAM

CONTROL PANEL

1. Power: control the power of machine

2. Fan: control the motor of fan

3. Conveyor: control the motor of conveyor

4. Heating: control the heating pipes

5. Temp. meter: adjust temp. of shrink tunnel

6. Speed Adjuster: adjust speed of conveyor

7. Upper Heating: adjust heating of upper heating pipes

8. Down Heating: adjust heating of down heating pipes

REFERENCE OF SHRINK TEMP. AND TIME

CAUTION

1.Rated power of this machine is very big; so make sure that input power of electricity is bigger than rated power of machine, otherwise machine is unable to work properly. Additionally, power source must be the same as noted on the tag, otherwise circuitry or electric components will be burned.

2.The electricity wires must be connected properly; otherwise it makes damage to machine and operator. When the power is 3 phases (4 wires) as noted on the tag, it must input the null wire, or the machine can’t work normally and easy to burn the electronics.

3.The machine must do the earth connection. It is easy to get electric shock  for operator without earth connection.

4.Do not set temp. above 200℃, or damage heating pipes or shorten its life.

5.The machine should be placed level; otherwise it will reduce the life of heating pipe.

6.During working, carbon brush in motor wears off. It is only for BSS-1538D. So check carbon brush in every half year. Replace it carbon brush when it wears out. If not, motor will damage. Clean powder of carbon brush in motor while replacing.

7.Every three months, check the wire and heating pipe in the tunnel because it is get aging and burned by heat from shrink tunnel; replace it if it is necessary.

8.Do not touch conveyor or stretch hands into shrink tunnel to keep from burning, while the machine is working.

9.In order to prolong the life of heating pipes, do the right operation according to following step:

a)While start machine, put on the heating device and hot fan together at the same time.

b)While stop machine, put off the heating device first and let fan run for a while to cool down.

10.Check the carbon brush of fan motor when the speed of motor is getting slower; carbon brush wears off gradually during usage, so check up the carbon brush often, which is found under a small cap; Replace it if cabon brush uses up, and clean up brush powder inside of motor.

commonMALFUNCTION

Case	Cause	Method
No heat in the tunnel	No power	Put on the power
	Heating switch broken	Replace
	Heating pipe or circuitry broken	Replace or repair
	AC contactor, Solid-booster or temp. meter broken	Scan the QR code to read on your phone We could not find any corresponding parameters, please add them to the properties table Previous None Next None LABEL SHRINKING MACHINE   Product description [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] FOREWORD Our company is a large scale company that specialized in development and manufacture of many models of thermal shrink packaging machines, and equipped with advanced production machinery. We have large scope of products models: micro- and extra-large machine, manual model and automatic model, simple model and high-exactitude model, which can meet many different requirements. Our shrink packaging machine has advantage of high heating efficiency, accurate temperature control and stable performances, which helps us win big market share in China, even overseas.     SPECIFICATION   Model BSS-1538 Power 7 KW Max. packing size (mm) Φ105*350H Adjustable Size of shrink tunnel (mm) 1000*150*150 Conveyor motor AC90W/220V Conveyor speed 0-10m/min Loading weight 15kg Conveyor 812 S/S plate Weight 90 kg Dimension (mm) 1500*350*1500 Packed size (mm) 1610*1030*490             STRUCTURE DIAGRAM     CONTROL PANEL   1. Power: control the power of machine 2. Fan: control the motor of fan 3. Conveyor: control the motor of conveyor 4. Heating: control the heating pipes 5. Temp. meter: adjust temp. of shrink tunnel 6. Speed Adjuster: adjust speed of conveyor 7. Upper Heating: adjust heating of upper heating pipes 8. Down Heating: adjust heating of down heating pipes   REFERENCE OF SHRINK TEMP. AND TIME   Shrinking membranes THINKNESS (MM) SHRINKING TIME (S) TEMPERATURE        (℃) PVC 0.02-0.06 5-10 110-130 PP 0.02-0.04 6-12 130-170 PE 0.06-0.20 10-60 150-180   CAUTION 1.Rated power of this machine is very big; so make sure that input power of electricity is bigger than rated power of machine, otherwise machine is unable to work properly. Additionally, power source must be the same as noted on the tag, otherwise circuitry or electric components will be burned. 2.The electricity wires must be connected properly; otherwise it makes damage to machine and operator. When the power is 3 phases (4 wires) as noted on the tag, it must input the null wire, or the machine can’t work normally and easy to burn the electronics. 3.The machine must do the earth connection. It is easy to get electric shock  for operator without earth connection. 4.Do not set temp. above 200℃, or damage heating pipes or shorten its life. 5.The machine should be placed level; otherwise it will reduce the life of heating pipe. 6.During working, carbon brush in motor wears off. It is only for BSS-1538D. So check carbon brush in every half year. Replace it carbon brush when it wears out. If not, motor will damage. Clean powder of carbon brush in motor while replacing. 7.Every three months, check the wire and heating pipe in the tunnel because it is get aging and burned by heat from shrink tunnel; replace it if it is necessary. 8.Do not touch conveyor or stretch hands into shrink tunnel to keep from burning, while the machine is working. 9.In order to prolong the life of heating pipes, do the right operation according to following step: a)While start machine, put on the heating device and hot fan together at the same time. b)While stop machine, put off the heating device first and let fan run for a while to cool down. 10.Check the carbon brush of fan motor when the speed of motor is getting slower; carbon brush wears off gradually during usage, so check up the carbon brush often, which is found under a small cap; Replace it if cabon brush uses up, and clean up brush powder inside of motor.   commonMALFUNCTION   Case Cause Method No heat in the tunnel No power Put on the power Heating switch broken Replace Heating pipe or circuitry broken Replace or repair AC contactor, Solid-booster or temp. meter broken 扫二维码用手机看 未找到相应参数组，请于后台属性模板中添加 上一个 无 下一个 无 Add:LTPM CHINA 2nd Floor,Dongxin Road and 5th Development Road ,Caizhai Industrial Zone,  Ruian City, Zhejing Province ,China Tel:86-0577-65158955    Fax: 86-0577-65158944 Business Phone : 86-0577-65158955 E-mail:info@chinaleadtop.com About Us Profile Quality Control Factory Tour   Products Solid Dosage Solution Liquid Filling Solution Injectable Solution Inner Packaging Solution More>>   News Company News Trade News Exhibition Contact Us Message Contact Us LeadTop Pharmaceutical Machinery Co., LTD 　浙ICP备16043185号-1 Powered by www.300.cn LeadTop Pharmaceutical Machinery Co., LTD　浙ICP备20003428号-1 Powered by www.300.cn