PRODUCTS
/
/
/
LPG Series High Speed Centrifugal Spray Drying Machine
All categories

LTPM CHINA 2nd Floor,Dongxin Road and 5th Development Road ,Caizhai Industrial Zone, Ruian City, Zhejing Province ,China

LPG Series High Speed Centrifugal Spray Drying Machine

Number of views:
0

LPG Series High Speed Centrifugal Spray Drying Machine

Retail price
0.0
Yuan
Market price
0.0
Yuan
Number of views:
0
Product serial number
Quantity
-
+
Stock:
0
1
Product description

Introduction:
Spray drying is the widest used technology in the liquid shaping technology and in the drying industry. Centrifugal Atomizing (Spray) Drying Equipment is most suitable for producing powder, particles or solid block products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, spray drying is useful to create the desired particle size, residual water contents, the stocking density, and the particle shape needed to meet precise standards

Working Principle:
The air is through the filter and heater, the air distributor which enters the dedicator top, the hot air takes the form of spiral and enters the dedicator evenly. The material liquid , from the material liquid trough from the at odds with the community or the leadership atomizer for the dedicator top of pump sending through the filter, make the material liquid gush out into an extremely small calorific drop, material liquid and hot air flow and keep in touch, moisture evaporate rapidly, within extremely short time dry to become finished product, finished product discharge by dry tower bottom and whirlwind separator, the waste gas is discharged by the air blower.

Technical Parameters

Model 5 10 15 20 25 50 100 150 200 500 800 1000 2000 3000 4500 6500
Inlet Temperature 140-350 automatically controlled
Outlet Temperature(℃) 80-90
Water evaporation capacity(kg/h) 5 10 15 20 25 50 100 150 200 500 800 1000 2000 3000 4500 6000
Diameter of atomizing tray(rpm) 50 80 80 120 120 120 120 150 150 150 180-210 Accordance with the requirement of process
Max Electric heating power(kw) 12 24 36 45 46 63 81 99  
Dried powder restoring rate ≥95
Length of covered area(m) 1.6 2.7 3 3.5 4 4.5 5.2 7 7.5 12.5 13.5 14.5 Decided in accordance the flow chart
Width of covered area(m) 1.1 1.5 1.8 2 2.7 2.8 3.5 5.5 6 8 12 14 ??Condition of field and requirement

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Previous
Next

LPG Series High Speed Centrifugal Spray Drying Machine

Product description
[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Introduction:
Spray drying is the widest used technology in the liquid shaping technology and in the drying industry. Centrifugal Atomizing (Spray) Drying Equipment is most suitable for producing powder, particles or solid block products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, spray drying is useful to create the desired particle size, residual water contents, the stocking density, and the particle shape needed to meet precise standards

Working Principle:
The air is through the filter and heater, the air distributor which enters the dedicator top, the hot air takes the form of spiral and enters the dedicator evenly. The material liquid , from the material liquid trough from the at odds with the community or the leadership atomizer for the dedicator top of pump sending through the filter, make the material liquid gush out into an extremely small calorific drop, material liquid and hot air flow and keep in touch, moisture evaporate rapidly, within extremely short time dry to become finished product, finished product discharge by dry tower bottom and whirlwind separator, the waste gas is discharged by the air blower.

Technical Parameters

Model 5 10 15 20 25 50 100 150 200 500 800 1000 2000 3000 4500 6500
Inlet Temperature 140-350 automatically controlled
Outlet Temperature(℃) 80-90
Water evaporation capacity(kg/h) 5 10 15 20 25 50 100 150 200 500 800 1000 2000 3000 4500 6000
Diameter of atomizing tray(rpm) 50 80 80 120 120 120 120 150 150 150 180-210 Accordance with the requirement of process
Max Electric heating power(kw) 12 24 36 45 46 63 81 99  
Dried powder restoring rate ≥95
Length of covered area(m) 1.6 2.7 3 3.5 4 4.5 5.2 7 7.5 12.5 13.5 14.5 Decided in accordance the flow chart
Width of covered area(m) 1.1 1.5 1.8 2 2.7 2.8 3.5 5.5 6 8 12 14 ??Condition of field and requirement

扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加
上一个
下一个

Add:LTPM CHINA 2nd Floor,Dongxin Road and 5th Development Road ,Caizhai Industrial Zone,  Ruian City, Zhejing Province ,China

Tel:86-0577-65158955    Fax: 86-0577-65158944
Business Phone : 86-0577-65158955
E-mail:info@chinaleadtop.com

lead top

LeadTop Pharmaceutical Machinery Co., LTD  浙ICP备16043185号-1

LeadTop Pharmaceutical Machinery Co., LTD 浙ICP备20003428号-1