DPP-250 Aluminum Plastic Blister Packing Machine-LeadTop Pharmaceutical Machinery Co., LTD,Pharmaceutical

Mailbox:info@chinaleadtop.com service@ltpmchina.com Business Phone : 86-0577-65158955

Product Category

LTPM CHINA 2nd Floor,Dongxin Road and 5th Development Road ,Caizhai Industrial Zone, Ruian City, Zhejing Province ,China

Tel:86-0577-65158955

Business Phone :

86-0577-65158955

info@chinaleadtop.com

Product Description

Simple Introduction:

The machine is new product which is improved based on customer’s requirements. It’s suitable for packaging of all kinds of liquid and solid in large & medium pharmaceutical factory, health medicine factory, hospital preparation lab, food industry, electronic industry, hardware industry, etc. It can protect the material from steam or dust, improve product packing degree, and increase the additional value. The machine is used to produce large quality and single product.

Main Technical Data:

MODEL:	DPP-250
Blanking frequency (Cutting/min):	15-60
Sheet's quantity of one blanking (sheets):	1-4
Capacity (sheets/hour):	14,400
Adjustable scope of feed travel: (mm)	10-160
Max Forming area and depth (mm)	270×120×25
Capacity of air compressor(m3/min):	≥0.36
Power supply:	380V AC, 50 Hz, Three Phase
Total Power	8Kw
Wrapper specification (mm): PVC Film Blister foil Alu Alu Foil	Max.270× (0.15-0.5) Max.270× (0.02-0.035) Max. 270*(0.11-0.25)
Weight (kg):	1260Kg

Feature:

Travel scope can be adjusted.
Alu Alu Blister Packaging is available for this machine.
Mould is located by locating groove which makes it easy to change mould. The machine heats the PVC through conduction and forms it through pressing and frothing.
The material is fed automatically. The mould and feeder can be designed as user’s requirements.
Speed is shifted by step-less transducer. Adopt the interface of human-machine and PLC programmable controller, it can synchronize accurately.
Adopt the equipment of trace pressing, batch number printing and scarp-collecting.
Stepping motor Pulling Material more accuracy and easy adjusting
The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machine’s life.