1.The name and type of the equipment 

GHL-3L&6L&8L high-speed mix granulator (Exchanger)

2. Principle of action

The powder raw material and adhesive in a cylinder are mixed fully at the bottom to turn into a humid soft material. Then it is crushed at a high speed and become uniform granules.

3. Function feature

The machine adopts a practical horizontal cylinder structure.

The driving shaft is equipped with inflatable seal. While washing, the air can be replaced by water.

Fluidized granulating processed is used and the final granules are quite round with high fluidity.

Compared with traditional technique, this type of machine can reduce 25% of adhesive and also shorten the drying time.

For each batch of material, with 2 minutes' dry mixing and 1-4 minutes' granulating, the efficiency is 4-5 times higher than that of traditional technique.

Dry mixing, wet mixing and granulating are finished inside the same sealed container, which is in conformity with the requirements of "GMP" .

4.The main technical characteristics.