NEWS
Check category
/
/
Trade News
The Different Types Of Tablet Coating Machines
The Different Types Of Tablet Coating Machines
Time of issue : 2020-06-30 11:57:27
Tablet coating machines work on the simple principle of applying the coating ingredients in the form of a solution to a group of tablets in a bed that may move horizontally or vertically. A concurrent flow of heated air helps to evaporate the solvent. The coating is equally distributed to the tablets through the movement of the bed.
See more information
Tablet coating machines work on the simple principle of applying the coating ingredients in the form of a solution to a group of tablets in a bed that may move horizontally or vertically. A concurrent flow of heated air helps to evaporate the solvent. The coating is equally distributed to the tablets through the movement of the bed.
Causes and Remedies of Cracking in Tablet Manufacturing
Causes and Remedies of Cracking in Tablet Manufacturing
Cracking in tablets during the compression is a major problem in tablet manufacturing. Some causes and solutions of the cracking of tablets are given here.

Cracking is a situation in which small cracks are identified on the top and bottom central surfaces of tablets during the processing of the tablets or during their subsequent use. Hardly are the cracks identified on the sides of the tablets but mainly on the top and bottom surfaces.
See more information
Cracking in tablets during the compression is a major problem in tablet manufacturing. Some causes and solutions of the cracking of tablets are given here.

Cracking is a situation in which small cracks are identified on the top and bottom central surfaces of tablets during the processing of the tablets or during their subsequent use. Hardly are the cracks identified on the sides of the tablets but mainly on the top and bottom surfaces.
Structure and principle of capsule filling Machine
Structure and principle of capsule filling Machine
Time of issue : 2020-06-30 11:55:14
The filling speed of capsule filling machine is faster and the size difference of capsule filling machine is small. In addition, capsule filling machine has many advantages, such as fast arrangement speed, high efficiency, simple operation, convenient maintenance, low power consumption and so on. It is the first choice capsule filling machine for pharmaceutical factory, health product factory, hospital preparation room

Structure of automatic capsule filling Machine

The automatic capsule filling machine consists of the empty capsule feeding device, the capsule distributing device, the powder discharging device, the metering disk mechanism, the capsule filling sealing mechanism, the main transmission mechanism in the box and the electrical control system.

1 Empty capsule feeding device: consisting of hopper and conveying pipeline, mainly storing empty capsule and making empty capsule vertically enter the capsule subdivision device one by one.
See more information
The filling speed of capsule filling machine is faster and the size difference of capsule filling machine is small. In addition, capsule filling machine has many advantages, such as fast arrangement speed, high efficiency, simple operation, convenient maintenance, low power consumption and so on. It is the first choice capsule filling machine for pharmaceutical factory, health product factory, hospital preparation room

Structure of automatic capsule filling Machine

The automatic capsule filling machine consists of the empty capsule feeding device, the capsule distributing device, the powder discharging device, the metering disk mechanism, the capsule filling sealing mechanism, the main transmission mechanism in the box and the electrical control system.

1 Empty capsule feeding device: consisting of hopper and conveying pipeline, mainly storing empty capsule and making empty capsule vertically enter the capsule subdivision device one by one.
The Most Complete Solution To Sticking And Punching Of Tablet Press Machine
The Most Complete Solution To Sticking And Punching Of Tablet Press Machine
In the process of pressing, there are often problems such as sticking and punching. When pressing the tablet, the fine powder on the surface of the tablet is adhered by the punch or die, but the surface is not smooth, uneven and dented. The inspection punch often has the fine powder sticking, which is called stick punching.
See more information
In the process of pressing, there are often problems such as sticking and punching. When pressing the tablet, the fine powder on the surface of the tablet is adhered by the punch or die, but the surface is not smooth, uneven and dented. The inspection punch often has the fine powder sticking, which is called stick punching.
Coronavirus disease (COVID-19) advice for the public When and how to use masks
Coronavirus disease (COVID-19) advice for the public When and how to use masks
When to use a mask



1.If you are healthy, you only need to wear a mask if you are taking care of a person with suspected 2019-nCoV infection.

2.Wear a mask if you are coughing or sneezing.

3.Masks are effective only when used in combination with frequent hand-cleaning with alcohol-based hand rub or soap and water.

4.If you wear a mask, then you must know how to use it and dispose of it properly.



When and how to wear medical masks to protect against coronavirus



1.Before putting on a mask, clean hands with alcohol-based hand rub or soap and water.

2.Cover mouth and nose with mask and make sure there are no gaps between your face and the mask.

3.Avoid touching the mask while using it; if you do, clean your hands with alcohol-based hand rub or soap and water.

4.Replace the mask with a new one as soon as it is damp and do not re-use single-use masks.

5.To remove the mask: remove it from behind (do not touch the front of mask); discard immediately in a closed bin; clean hands with alcohol-based hand rub or soap and water.
See more information
When to use a mask



1.If you are healthy, you only need to wear a mask if you are taking care of a person with suspected 2019-nCoV infection.

2.Wear a mask if you are coughing or sneezing.

3.Masks are effective only when used in combination with frequent hand-cleaning with alcohol-based hand rub or soap and water.

4.If you wear a mask, then you must know how to use it and dispose of it properly.



When and how to wear medical masks to protect against coronavirus



1.Before putting on a mask, clean hands with alcohol-based hand rub or soap and water.

2.Cover mouth and nose with mask and make sure there are no gaps between your face and the mask.

3.Avoid touching the mask while using it; if you do, clean your hands with alcohol-based hand rub or soap and water.

4.Replace the mask with a new one as soon as it is damp and do not re-use single-use masks.

5.To remove the mask: remove it from behind (do not touch the front of mask); discard immediately in a closed bin; clean hands with alcohol-based hand rub or soap and water.
Types and Functionality of Tablet Coating
Types and Functionality of Tablet Coating
Time of issue : 2020-06-30 11:51:14
Different types of tablets need different coating according to the nature and properties of the tablets.Coating of tablets helps to protract the tablets from environmental conditions on the other hand it improves the taste of tablets.

Tablet coating is the outer covering of a tablet with a layer/substance. The coats used range from the traditional sugar coating to the present polymer and polysaccharides based coats.

The types of coats depending on the specific functionality of the tablet as well as the target consumer of the tablet.
See more information
Different types of tablets need different coating according to the nature and properties of the tablets.Coating of tablets helps to protract the tablets from environmental conditions on the other hand it improves the taste of tablets.

Tablet coating is the outer covering of a tablet with a layer/substance. The coats used range from the traditional sugar coating to the present polymer and polysaccharides based coats.

The types of coats depending on the specific functionality of the tablet as well as the target consumer of the tablet.
Working and Principle of Tablet Compression Machine
Working and Principle of Tablet Compression Machine
Time of issue : 2020-06-30 11:50:00
Tablet compression machine makes the tablets by pressing the granules in die with lower and upper punch.

Tablets are being formed by compressing the granules using the compression machines. Different innovations to tablet compression machines are being done to improve the production rates and now it is possible to produce more than 500,000 tablets per hour. A tablet formation takes place by the combined pressing action of two punches and a die.
See more information
Tablet compression machine makes the tablets by pressing the granules in die with lower and upper punch.

Tablets are being formed by compressing the granules using the compression machines. Different innovations to tablet compression machines are being done to improve the production rates and now it is possible to produce more than 500,000 tablets per hour. A tablet formation takes place by the combined pressing action of two punches and a die.
Daily Maintenance Skills Of Tablet Press Machine Mould In Pharmaceutical Field
Daily Maintenance Skills Of Tablet Press Machine Mould In Pharmaceutical Field
Tablet press belongs to a kind of pharmaceutical processing equipment, which is suitable for tablet pharmaceutical tablet forming. In the process of tablet pharmaceutical production, tablet press mold plays an important role in the quality of products.



For example, the punch hole of the rotary tablet press becomes larger, resulting in uneven punching packing, resulting in non-compliance of the product weight difference or cracks; the length of the punch body varies, directly affecting the product weight difference and hardness, resulting in cracks, or affecting the brittleness; the punch has edge gouging, curling or uneven punch, resulting in one-sided cracks, stick punching, etc. Therefore, before using the die, we need to pay attention to inspection and necessary maintenance or replacement to ensure the stability of product quality and continuous tablet production, and reduce the cost of the enterprise.



In addition, it is necessary to check and maintain the die of powder tablet press after installation and use, so as to ensure that the equipment is in good condition when the next enterprise uses it. Therefore, in the daily management, the operator must pay attention to the daily maintenance, maintenance and storage of the tablet press mold to ensure the quality of the products. In this regard, there are tablet press equipment manufacturers to share the daily maintenance and service skills of the tablet press mold, mainly divided into five points, for industry reference only.



First, if the pharmaceutical manufacturing enterprise newly purchases the full-automatic tablet press mould, it is necessary to let the tablet press mould be received and accepted by the workshop mechanic, and then it will be handed over to the tablet pressing team leader for re confirmation. Under the condition of ensuring stable operation of the equipment, it can be put into production.
See more information
Tablet press belongs to a kind of pharmaceutical processing equipment, which is suitable for tablet pharmaceutical tablet forming. In the process of tablet pharmaceutical production, tablet press mold plays an important role in the quality of products.



For example, the punch hole of the rotary tablet press becomes larger, resulting in uneven punching packing, resulting in non-compliance of the product weight difference or cracks; the length of the punch body varies, directly affecting the product weight difference and hardness, resulting in cracks, or affecting the brittleness; the punch has edge gouging, curling or uneven punch, resulting in one-sided cracks, stick punching, etc. Therefore, before using the die, we need to pay attention to inspection and necessary maintenance or replacement to ensure the stability of product quality and continuous tablet production, and reduce the cost of the enterprise.



In addition, it is necessary to check and maintain the die of powder tablet press after installation and use, so as to ensure that the equipment is in good condition when the next enterprise uses it. Therefore, in the daily management, the operator must pay attention to the daily maintenance, maintenance and storage of the tablet press mold to ensure the quality of the products. In this regard, there are tablet press equipment manufacturers to share the daily maintenance and service skills of the tablet press mold, mainly divided into five points, for industry reference only.



First, if the pharmaceutical manufacturing enterprise newly purchases the full-automatic tablet press mould, it is necessary to let the tablet press mould be received and accepted by the workshop mechanic, and then it will be handed over to the tablet pressing team leader for re confirmation. Under the condition of ensuring stable operation of the equipment, it can be put into production.
Pre
1
2
3
4
5
6

Add:LTPM CHINA 2nd Floor,Dongxin Road and 5th Development Road ,Caizhai Industrial Zone,  Ruian City, Zhejing Province ,China

Tel:86-0577-65158955    Fax: 86-0577-65158944
Business Phone : 86-0577-65158955
E-mail:info@chinaleadtop.com

lead top

LeadTop Pharmaceutical Machinery Co., LTD  浙ICP备16043185号-1

LeadTop Pharmaceutical Machinery Co., LTD 浙ICP备20003428号-1