FAQ for Ampoule filling and sealing machine

Published Time:

2022-02-23

Peristaltic pump (mainstream pump): easy to clean, slightly more expensive, and the filling accuracy is the same as that of the piston syringe pump

Ampoule filling and sealing machine

 

Q1：Metering pumps for ampoules filling and sealing machines.

A：1. Piston syringe pump: not easy to clean and cheap. Filling accuracy: 10ml ±1%.

2. Peristaltic pump (mainstream pump): easy to clean, slightly more expensive, and the filling accuracy is the same as that of the piston syringe pump.

3. Ceramic pump.

 

Q2：Ampoule filling and sealing machine with 6 needles for injection? Or at least 8 needles?

A：The vertical ampoule filling and sealing machine has 8 needles.

Horizontal ampoule filling and sealing machines can have 6 or 8 needles.

 

Q3：What should be paid attention to in ALG series ampoule filling and sealing machine during the injection process of ampoules?

A：The ALG ampoule filling and sealing machine needs a laminar flow hood during production, and the verification that needs to be done during the production process will be more troublesome than the vertical ampoule filling and sealing machine.

 

Q4：What equipment needs to be replaced if the plastic ampoules are filled with strong corrosive liquids?

A：Filling acidic materials: The barrel needs to be enamel or attached with PTFE (Teflon).

Filling strong alkali material: the barrel is covered with PTFE, and the filling head is changed to PTFE material

Related News

FAQ for Separation and purification method (2)

Centrifuges are used for solid-liquid separation and liquid-liquid separation, purifying extracts or concentrates. Separation by centrifugal machine belongs to physical purification.

FAQ for Cleaning, Sterilization and Aseptic Filling

What machines are suitable for cleaning and sterilizing rubber stoppers and aluminum caps? Will the pure steam sterilizer damage the rubber stopper and aluminum caps due to the high temperature?

FAQ for Filtration, Cleaning, Mixing and Dosing

A single cycle cleaning step takes about 3 minutes, and the water consumption is 80L; cleaning with a cleaning agent takes about 8 minutes, and the water consumption is also 80L.

FAQ for Separation and Purification Method

The centrifugal machine is mainly used to separate the wax in the extraction liquid after extraction

FAQ for Water Treatment

The fully automatic control system has high performance, it can be controlled directly on the touch screen, and various indicators can be directly observed