NEWS
Check category
/
/
FAQ for Blister Packing Machine

FAQ for Blister Packing Machine

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-01-05 08:52
  • Views:0

(Summary description)The blister packing machine is suitable for packing of all kinds of liquid and solid in large & medium pharmaceutical factory, health medicine factory, hospital preparation lab, food industry, electronic industry, hardware industry, etc. It can protect the material from steam or dust, improve product packing degree, and increase the additional value. The machine is used to produce large quality and single product.

FAQ for Blister Packing Machine

(Summary description)The blister packing machine is suitable for packing of all kinds of liquid and solid in large & medium pharmaceutical factory, health medicine factory, hospital preparation lab, food industry, electronic industry, hardware industry, etc. It can protect the material from steam or dust, improve product packing degree, and increase the additional value. The machine is used to produce large quality and single product.

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-01-05 08:52
  • Views:0
Information

Blister Packing Machine

 

The blister packing machine is suitable for packing of all kinds of liquid and solid in large & medium pharmaceutical factory, health medicine factory, hospital preparation lab, food industry, electronic industry, hardware industry, etc. It can protect the material from steam or dust, improve product packing degree, and increase the additional value. The machine is used to produce large quality and single product.

 

Q1What is the packaging material specification of the flat type blister packing machine?

ADPP-88 blister packing machine packaging film 120mm.

DPP-140 blister packing machine packaging film 170mm.

DPP-250 blister packing machine packaging film 280mm.

 

Q2What is the thickness range of aluminum foil and PVC film for blister packing machine?

ABetween 250UM-350UM for PVC Film, 20-35microns for aluminum foil are all ok for working on blister packing machine.

 

 

Q3What is the maximum forming area of the blister packing machine? What is the depth?

AThe depth of DPP-88 is within 12MM, DPP-140 is 20MM, and DPP-250 is 35MM. If the forming area beyond our standard size, we can customize the machine for you.

 

Q4What is the weight of a roll of PVC film and aluminum foil film on the DPP-88 blister packing machine?

AOne roll of PVC is 20kgs, and one roll of aluminum foil is 15kgs.

 

Q5For blister packing machine, how much space is reserved around the steel letters on the blister board?

AAt least 1.5 mm on each side and at least 2 mm on the top and bottom.

 

Q6What is the deepest forming thickness of the blister packing machine?

A35mm for standard model blister packing machine.

 

 

Q7The blister packing machine is first made of aluminum and plastic, and then made of alu/alu in the later period. Can it be realized by adding devices?

AIt can be achieved by adding alu alu feeder, and also by changing alu alu mould.

 

Q8What is the difference between the effect of using a chiller and a water pump in a blister packing machine?

AThe effect of using a chiller is better, and the small device DPP-88 can be used with a water pump for water circulation for cooling down the mould.

 

Q9What is the difference between blister packing machine material PTP and cold formed aluminum?

ACold formed aluminum is used for forming alu alu, and PTP is the aluminum foil to seal with alu alu or alu pvc.

 

Q10What is the reason for the loss of materials in the liquid blister packing machine?

A1. The sealing is not tight.

2. The edge distance is too narrow.

3. The reason for the material itself (pinholes).

 

Q11How does the material feed into the blister automatically on blister packing machine?

AIn the case of aluminum plastic, it is a disk brush feeder, and a special feeder for aluminum and aluminum.

 

Q12Can blister packing machine molds be purchased separately?

AYes, it can be divided into upper mold/lower mold, heat-sealed upper mold/lower mold, and punching.

 

Q13In addition to packing aluminum foil + PVC, the blister packing machine can also work with paper + PET?

APET (forming)+paper, but the paper must have a PE layer or a heat seal glue layer, so that it can be sealed by our blister packing machine.

 

Q14Does DPP-120 aluminum plastic packing machine have Precut?

APrecut means tearing line, it can be done, and it needs to increase by more than 1,000 yuan.

 

Q15Blister packing machine: What are the sample requirements for alu alu feeders?

A2-3KG.

1. Make sure that the tablet is not an effervescent tablet, otherwise it will be too brittle, and it will break if it cannot be added with a feeder.

2. If there is a coating on the outside of the tablet, it must be coated.

3. If the tablets are not easy to send, you can send them in the shape of a tablet with flour.

 

Q16What is the mechanical inspection of the blister packing machine?

AUse the principle of mechanical tableting to automatically identify and eliminate the lack of drugs (capsules, tablets, etc.). Unable to check liquids materials.

 

Q17What is the visual inspection of blister packing machine?

AUsing the principle of image recognition and detection (camera system), it can automatically identify the memory of the lack of medicine and eliminate 100% of the waste products, and can connect to the display to increase the video display monitoring function.

Keyword:

Scan the QR code to read on your phone

Add:LTPM CHINA 2nd Floor,Dongxin Road and 5th Development Road ,Caizhai Industrial Zone,  Ruian City, Zhejing Province ,China

Tel:86-0577-65158955    Fax: 86-0577-65158944
Business Phone : 86-0577-65158955
E-mail:info@chinaleadtop.com  service@ltpmchina.com

lead top

LeadTop Pharmaceutical Machinery Co., LTD  浙ICP备16043185号-1

LeadTop Pharmaceutical Machinery Co., LTD 浙ICP备20003428号-1