NEWS
Check category
/
/
FAQ for Coating machine

FAQ for Coating machine

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-10-29 16:11
  • Views:0

(Summary description)

FAQ for Coating machine

(Summary description)

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-10-29 16:11
  • Views:0
Information

Q1What is the role of the dehumidifier in the tablet film coating machine?

AFor Inlet air Cool down and dehumidify.

 

Q2The Tablet Film coating machine is generally not in contact with alcohol?

ABasically some film requires Alcohol as solvent for tablet coating.

 

Q3The role of the syrup pump in tablet film coating machine.

AOne pump for two purposes, it is suitable for both film coating and sugar coating.

 

Q4How long is the process of one batch on Tablet Film Coating?

AThe working time of the coating machine is also different according to the actual output and medicinal formula, basically 2-4 hours per batch.

 

Q5Is a changeable drum coating machine necessarily better than a non-changeable drum coating machine? why?

AChanging the barrel can realize coating with different feeding amounts. When the amount of material is small, the coating pan will become smaller and the coating effect will be better.

 

Q6Can the BG-Series high-efficiency tablet film coating machine use powder for coating?

ANo. But the raw material of tablet film is in powder form, it should be prepared with solvent or water or other liquid material first to spray on to tablet surface and dry.

 

Q7What is the difference between a high-efficiency coating machine and an ordinary tablet coating pan?

AThe disadvantage of ordinary coating pan has a long time, large dust, and poor coating effect (uneven).

 

Q8Can the simple coating machine (BYC-Series) control the temperature?

AYes, it can control the inlet air temperature and the temperature of the coating pan.

 

Q9Can the simple coating machine(BYC-Series) use hot air and cold air?

AYes.

 

Q10The main difference between a simple coating machine(BYC-Series) and a high-efficiency coating machine (BG-Series)

A1. The high-efficiency coating machine is carried out in a closed system with negative pressure, and there will be no dust flying.

2. The high-efficiency coating machine is equipped with an air inlet fan and a suction fan. The suction will suck the coating powder onto the surface of the tablet, ensuring the coating effect and will not cause waste of materials.

3. The high-efficiency coating machine has a formula storage function to ensure that different batches can quickly read the formula without resetting.

4. The high-efficiency coating machine is equipped with an automatic air valve control system to automatically control the temperature and air volume.

5. The high-efficiency coating machine has a By pass function, which can realize the non-stop function of feeding and discharging, ensuring the consistency of production parameters of each batch, and does not need to reheat, which can be more energy-saving.

 

Q11What is the approximate temperature in the coating pan?

A40-60 degrees Celsius, this needs to be based on actual needs.

 

Q12How often does the coating machine filter change?

AAccording to the use of the machine, it is recommended to replace it once a year for the first and second stages. (Usually, the primary and secondary filters can be cleaned three to four times.) The high-efficiency filter has a longer lifespan and can be replaced if it is broken.

 

Q13What are the properties of the coating powder?

AThe coating powder is usually composed of talc, HPMC, pigment and other materials, and the ingredients of the coating powder can also be proportioned according to specific needs.

 

Q14How much coating powder do I need for a kilogram of tablets?

AThis mainly depends on how much weight you want to gain, how thick the film or sugar coating is.

 

Q15How long is the coating time for a batch? What are the factors affected?

A2-4 hours, this needs to be based on weight gain, temperature and humidity.

 

Q16What is the difference between the non-perforated pan and the perforated pan of the coating machine?

AThe non-porous pot is more suitable for pellets.

 

Q17What is the difference between a non-porous coating machine and a porous coating machine? Is there a difference in materials?

AThe non-porous coating machine is generally used to produce sugar-coated small particles or tablets below 3mm, and the porous coating machine mainly produces products above 3mm.

 

Q18What is included in the air inlet filter?

AThe air inlet filter is divided into three levels: primary filter, secondary filter, and high efficiency filter (HEPA Filter).

 

Q19The difference between film and sugar coating, weight gain.

AFilm, the general weight gain is 3%;

Sugar coating, weight gain 20-50%;

For sugar coating, change the spray gun to a dropper nozzle.

 

Q20How long is the coating time for a batch of tablets?

A2-4 hours.

 

Q21What is the function of Auto Air Valve System in the coating machine?

AWhen feeding the material for the first time, the fan can be heated while feeding, and the dust that may exist in the pipeline can be removed, saving time and cleaning.

After the production is completed, there is no need to stop the machine when discharging and re-feeding the second batch of materials, and there is no need to wait for all parameters and other parameters to be reset and re-arrival before feeding, which saves time and labor.

 

Q22What is bypass?

AWhen the coating of a batch of materials is completed, there is no need to restart the machine, adjust the temperature, set technical parameters, and then put the next batch of materials.

 

Q23Curve printing: The temperature curve is displayed on the touch screen. Need to print and connect the machine with USB?

AThis should be called Curve display, temperature curve, yes, it can be printed or read by USB. If you want to print, you need to have a printer or a paper recorder.

 

Q24What is a hot air sensor?

AThe temperature sensor controls the heating temperature of the air.

 

Q25What is Infrared temperature?

AThe far-infrared tablet surface temperature measurement, it can prevent the material from changing due to the high temperature of the tablet, and the coating process can be designed more accurately.

 

Q26What is the weighing system?

AAutomatic weighing system for coating solvent preparation purpose.

 

Q27Function of Three auto valve.

AAutomatic control of air volume and By pass function.

Keyword:

Scan the QR code to read on your phone

Add:LTPM CHINA 2nd Floor,Dongxin Road and 5th Development Road ,Caizhai Industrial Zone,  Ruian City, Zhejing Province ,China

Tel:86-0577-65158955    Fax: 86-0577-65158944
Business Phone : 86-0577-65158955
E-mail:info@chinaleadtop.com  service@ltpmchina.com

lead top

LeadTop Pharmaceutical Machinery Co., LTD  浙ICP备16043185号-1

LeadTop Pharmaceutical Machinery Co., LTD 浙ICP备20003428号-1