FAQ for Labeling Machine

Published Time:

2021-11-30

Q1：The difference between a servo motor and a stepper motor. A：The servo motor is more stable. But when the labeling speed is below 50 bottles, there is no difference. ……

Q1：The difference between a servo motor and a stepper motor.
A：The servo motor is more stable. But when the labeling speed is below 50 bottles, there is no difference.

Q2：Can the labeling machine be connected to the existing blister packaging machine?
A：Yes， labeling machine can be connected with blister packing machine. 

Q3：What kind of bottle is the maximum speed of MT-200 automatic labeling machine?
A：Usually it is a bottle with a diameter of below 200mm can be worked on MT-200  automatic labeling machine.

Q4：Different bottles are used in the same labeling machine, do I need to change the mold?
A：There is no need to change the mold, just adjust it according to the size of the bottle. But if the bottle height changed, it may require to change Label Rolling station, so before you order labeling machine, you’d better to tell your bottle size range. 

Q5：Can round bottle labeling and square bottle labeling be on the same automatic labeling machine?
A：Yes, you can use round bottle and square bottle on the same labeling machine, but you need to figure it out before you order labeling machine, because we need to add some parts on the labeling machine to work with both bottle shape.

Q6：When the label width changes, do I need to replace the label/pressing roller?
A：Yes, you need to change the label roller, which is usually made according to the largest label at the beginning.

Q7：If the label size exceeds the machine size of MT-200, which labeling machine is used?
A：It depends on the specific size, and the labeling machine can be made according to specific requirements. 

Q8：How many samples are needed for the labeling machine while we need to  test the machine?
A：At least 20 bottles are required for one type of bottle. The label sample needs to be at least one roll.

Q9：How to locate the round bottle labeling?
A：Use photoelectric eye and servo for positioning the labeling.

Q10：What is the main purpose of the coding machine?
A：Used to print drug tracking codes: barcodes, QR codes, etc. It has the traceability function of pharmaceutical production. Of course, you can also print batch number for the coding machine as well on labeling machine.

Q11：Can the labeling machine put two labels on one side of the bottle?
A：Yes. The labeling machine has this function.

Q12：If the label paper of the round bottle is not self-adhesive and has no stickiness, can I use the model MT-200 labeling machine?
A：Cannot be used. The MT-200 labeling machine is only suitable for self-adhesive label paper. If the label paper is not sticky, you can choose a paste labeling machine (also called a cold glue labeling machine).

Q13：Is there a labeling machine or printer that prints a QR code on the label?
A：Can use laser, thermal transfer, inkjet printer.

Related News

FAQ for Separation and purification method (2)

Centrifuges are used for solid-liquid separation and liquid-liquid separation, purifying extracts or concentrates. Separation by centrifugal machine belongs to physical purification.

FAQ for Cleaning, Sterilization and Aseptic Filling

What machines are suitable for cleaning and sterilizing rubber stoppers and aluminum caps? Will the pure steam sterilizer damage the rubber stopper and aluminum caps due to the high temperature?

FAQ for Filtration, Cleaning, Mixing and Dosing

A single cycle cleaning step takes about 3 minutes, and the water consumption is 80L; cleaning with a cleaning agent takes about 8 minutes, and the water consumption is also 80L.

FAQ for Separation and Purification Method

The centrifugal machine is mainly used to separate the wax in the extraction liquid after extraction

FAQ for Water Treatment

The fully automatic control system has high performance, it can be controlled directly on the touch screen, and various indicators can be directly observed