LeadTop Pharmaceutical Machinery Co., LTD

BLOG

2021/01/05

In winter, what are the anti freezing measures for pharmaceutical machines?

In winter, the temperature is greatly reduced, people often put on thick coats and hats to keep warm, in order to prevent sick cold. In fact, as people are afraid of cold, in the low temperature season, pharmaceutical machines also need to do a good job in heat preservation and antifreeze measures to ensure the stable operation of the equipment. So, what are the anti freezing measures for pharmaceutical machines?


2020/12/31

Operation Specification And Maintenance Method Of Automatic Capsule Filling Machine

Regarding the fully automatic capsule filling machine, what operating specifications and maintenance methods we usually need to pay attention to, the following editor will take you to learn more.


2020/06/30

The Different Types Of Tablet Coating Machines

Tablet coating machines work on the simple principle of applying the coating ingredients in the form of a solution to a group of tablets in a bed that may move horizontally or vertically. A concurrent flow of heated air helps to evaporate the solvent. The coating is equally distributed to the tablets through the movement of the bed.


2020/06/30

Causes and Remedies of Cracking in Tablet Manufacturing

Cracking in tablets during the compression is a major problem in tablet manufacturing. Some causes and solutions of the cracking of tablets are given here. Cracking is a situation in which small cracks are identified on the top and bottom central surfaces of tablets during the processing of the tablets or during their subsequent use. Hardly are the cracks identified on the sides of the tablets but mainly on the top and bottom surfaces.


< 1...678...14 >

Related News

FAQ for Separation and purification method (2)

Centrifuges are used for solid-liquid separation and liquid-liquid separation, purifying extracts or concentrates. Separation by centrifugal machine belongs to physical purification.

FAQ for Cleaning, Sterilization and Aseptic Filling

What machines are suitable for cleaning and sterilizing rubber stoppers and aluminum caps? Will the pure steam sterilizer damage the rubber stopper and aluminum caps due to the high temperature?

FAQ for Filtration, Cleaning, Mixing and Dosing

A single cycle cleaning step takes about 3 minutes, and the water consumption is 80L; cleaning with a cleaning agent takes about 8 minutes, and the water consumption is also 80L.

FAQ for Separation and Purification Method

The centrifugal machine is mainly used to separate the wax in the extraction liquid after extraction

FAQ for Water Treatment

The fully automatic control system has high performance, it can be controlled directly on the touch screen, and various indicators can be directly observed