2020/06/30

Structure and principle of capsule filling Machine

The filling speed of capsule filling machine is faster and the size difference of capsule filling machine is small. In addition, capsule filling machine has many advantages, such as fast arrangement speed, high efficiency, simple operation, convenient maintenance, low power consumption and so on. It is the first choice capsule filling machine for pharmaceutical factory, health product factory, hospital preparation room Structure of automatic capsule filling Machine The automatic capsule filling machine consists of the empty capsule feeding device, the capsule distributing device, the powder discharging device, the metering disk mechanism, the capsule filling sealing mechanism, the main transmission mechanism in the box and the electrical control system. 1 Empty capsule feeding device: consisting of hopper and conveying pipeline, mainly storing empty capsule and making empty capsule vertically enter the capsule subdivision device one by one.

2020/06/30

The Most Complete Solution To Sticking And Punching Of Tablet Press Machine

In the process of pressing, there are often problems such as sticking and punching. When pressing the tablet, the fine powder on the surface of the tablet is adhered by the punch or die, but the surface is not smooth, uneven and dented. The inspection punch often has the fine powder sticking, which is called stick punching.

2020/06/30

Coronavirus disease (COVID-19) advice for the public When and how to use masks

When to use a mask 1.If you are healthy, you only need to wear a mask if you are taking care of a person with suspected 2019-nCoV infection. 2.Wear a mask if you are coughing or sneezing. 3.Masks are effective only when used in combination with frequent hand-cleaning with alcohol-based hand rub or soap and water. 4.If you wear a mask, then you must know how to use it and dispose of it properly. When and how to wear medical masks to protect against coronavirus 1.Before putting on a mask, clean hands with alcohol-based hand rub or soap and water. 2.Cover mouth and nose with mask and make sure there are no gaps between your face and the mask. 3.Avoid touching the mask while using it; if you do, clean your hands with alcohol-based hand rub or soap and water. 4.Replace the mask with a new one as soon as it is damp and do not re-use single-use masks. 5.To remove the mask: remove it from behind (do not touch the front of mask); discard immediately in a closed bin; clean hands with alcohol-based hand rub or soap and water.

2020/06/30

Types and Functionality of Tablet Coating

Different types of tablets need different coating according to the nature and properties of the tablets.Coating of tablets helps to protract the tablets from environmental conditions on the other hand it improves the taste of tablets. Tablet coating is the outer covering of a tablet with a layer/substance. The coats used range from the traditional sugar coating to the present polymer and polysaccharides based coats. The types of coats depending on the specific functionality of the tablet as well as the target consumer of the tablet.

2020/06/30

Working and Principle of Tablet Compression Machine

Tablet compression machine makes the tablets by pressing the granules in die with lower and upper punch. Tablets are being formed by compressing the granules using the compression machines. Different innovations to tablet compression machines are being done to improve the production rates and now it is possible to produce more than 500,000 tablets per hour. A tablet formation takes place by the combined pressing action of two punches and a die.

2020/06/30

Daily Maintenance Skills Of Tablet Press Machine Mould In Pharmaceutical Field

Tablet press belongs to a kind of pharmaceutical processing equipment, which is suitable for tablet pharmaceutical tablet forming. In the process of tablet pharmaceutical production, tablet press mold plays an important role in the quality of products. For example, the punch hole of the rotary tablet press becomes larger, resulting in uneven punching packing, resulting in non-compliance of the product weight difference or cracks; the length of the punch body varies, directly affecting the product weight difference and hardness, resulting in cracks, or affecting the brittleness; the punch has edge gouging, curling or uneven punch, resulting in one-sided cracks, stick punching, etc. Therefore, before using the die, we need to pay attention to inspection and necessary maintenance or replacement to ensure the stability of product quality and continuous tablet production, and reduce the cost of the enterprise. In addition, it is necessary to check and maintain the die of powder tablet press after installation and use, so as to ensure that the equipment is in good condition when the next enterprise uses it. Therefore, in the daily management, the operator must pay attention to the daily maintenance, maintenance and storage of the tablet press mold to ensure the quality of the products. In this regard, there are tablet press equipment manufacturers to share the daily maintenance and service skills of the tablet press mold, mainly divided into five points, for industry reference only. First, if the pharmaceutical manufacturing enterprise newly purchases the full-automatic tablet press mould, it is necessary to let the tablet press mould be received and accepted by the workshop mechanic, and then it will be handed over to the tablet pressing team leader for re confirmation. Under the condition of ensuring stable operation of the equipment, it can be put into production.

2020/06/30

Structure Of Automatic Capsule Filling Machine

The fully automatic capsule filling machine consists of an empty capsule discharge device, a capsule distribution device, a powder discharge device, a metering plate mechanism, a capsule filling and sealing mechanism, a box main drive mechanism, and an electrical electrical control system. 1, empty capsule discharge device: composed of hoppers and transmission lines, the main storage of empty capsules and empty capsules one by one vertical into the capsule division device. 2.The capsule distribution device: Enables the empty capsule to enter the selection fork of the distribution device, and the selection of the fork to move down will send the next six capsules at a time, and the rubber cap will be on it. At the same time, the vacuum separation system passes the capsule into the module and separates the body cap. 3, powder discharge device: consists of powder bucket, powder bucket screw, down material transport Guandeng, mainly under the screw and stirring effect of the stored powder has control into the metering plate. 4, measuring plate mechanism: according to the capsule specifications and the amount of the matching measuring plate specifications. Powder in the intermittent rotation of the measuring plate through five times filled compacted into the column, and pushed into the next module of the capsule. 5, capsule filling and sealing mechanism: When pushed into the capsule body under the drug column capsule, the upper and lower modules of the rubber cap and the lower capsule body push up to buckle it.

2020/06/30

Hemp Extraction Turning Out To Be A Huge Growth Opportunity For Cannabis Companies

It may be the hottest portion of the hottest market in 2019. But such a demand also creates questions about is there enough supply to meet that demand of basic resources especially the extractors; the ones who extract the CBD from its various sources. Some observers even predict that there won't be enough supply to meet the demand for cannabis in oil form. But as one article said: "business is booming for cannabis extraction companies, despite the supply shortages." Some of the bigger well known cannabis companies have built or are building their own extraction facilities to complement their growth operations, but experts say that that infrastructure won't fill the future demand for cannabis oil products. Active Healthcare companies in the markets this week include: Sugarmade, Inc. (OTCQB:SGMD), Hemp Inc. (OTCPK: HEMP), Puration, Inc. (OTCPK: PURA), Terra Tech Corp. (OTCQX: TRTC), Village Farms International, Inc. (NASDAQ: VFF) (TSX: VFF.TO). Some writers believe that as the cannabis industry evolves, it will become fragmented, with various companies specializing in separate parts of the vertical market… just like other verticals in other industry markets. They predict that companies focusing solely on cannabis extraction will end up being an increasingly important subsection of the overall industry. Sugarmade, Inc. (OTCQB:SGMD) BREAKING NEWS: Sugarmade, a leading provider of hydroponic and other supplies to the agricultural and hemp sectors, today announces a new business initiative, which is expected the expand the Company' revenue base. Over the coming weeks, the Company will be entering the market for hemp extraction equipment and technologies, including several Chinese proprietary technologies, which hold the promise of increasing extraction efficiencies. "Our staff has done extensive research into the fast growing hemp industry. We continue to see an imbalance between cultivation outputs and extraction capacities within the industry. This leads us to believe the market for extraction services and the equipment required by these extraction companies will continue to accelerate. We plan to not only market several domestic technologies, but also next generation technologies we plan to important from Southern China, were hemp cultivation and herbal extraction technologies are well ahead of North America," commented Jimmy Chan, CEO of Sugarmade. According to the U.S. Department of Agriculture, farm production within the United States is expected to fall an additional 6.7% this year on top of already weak market over the past few years. These reductions will likely result in the overall U.S. agricultural production for 2019 being the lowest sice 2006. Prices for the commodities that are being produced are also at near record levels. One of the few bright spots in the agricultural sector is industrial hemp, which became legal via the December passage of the U.S. Farm bill. Estimates for hemp production for the 2019 season continue to be revised upward, with major hemp producing states, such as Colorado, Kentucky, Oregon, North Dakota, and others, reporting sharp increases in both cultivation applications and expected acreages. Arcview Market Research, is now predicting the market for Cannabidiol (CBD), which is mainly derived from hemp, will surpass $20 billion by year 2020. Hemp and its by products are growing fast and are one of the few bright spots in the agricultural sector. Mr. Chan continued, "It is clear the 2019 and 2020 hemp cultivation seasons will be massive. We expect the power balance between cultivators and extractors to continue to heavily favor extractors and we are seeing that part of the industry expand massively to be able to handle the significant amounts of hemp biomass that will be harvested and will ultimately be processed. We are planning to launch an effort to distribute not only legacy extraction equipment to extraction companies, but we also plan to begin distribution of next generation extraction technologies developed in the Chinese providence of Yunnan where the hemp industry has existed for more than a thousand years." Read this and more news for Sugarmade at: https://www.financialnewsmedia.com/news-sgmd/